How Much Can a Horse Pull?

We get asked this question in the museum quite frequently. How much can a horse pull?
The general rule of thumb is about three times its body weight under ideal conditions. The average horse weighs about 1000 lbs so 3000 lbs can be pulled on flat roads. The weight ratio changes based on various conditions. In hilly country, the ratio changes to about 2 to 1 and in very bad road conditions (sand or mountains) that ratio can become 1 to 1. Other factors such as the horse’s physical condition, the weight of the vehicle, weight distribution, soil conditions, weather and even the driver’s skills can affect the amount of weight a horse can pull. Who knew!?

The “Bell” of the Ball: Sleigh Bells

Five open bells of varying sizes dangling in a row from an inverted bracket with legs to mount to a horse's hames.Two sets of shaft bells: one with three bells suspended in a row from a metal bracket with legs to mount on top of a vehicle's shaft, and one with three bells dangling from a bar with metal loops at either end to clam around a shaft from underneath.A trio of staggered chimes or a decorative metal bracket that could be mounted to the saddle of a horse.

There were many types of bells used on horse-drawn sleighs back in the 19th century. There were of course the “jingle bells” or “crotals” that we now keenly associate with Christmas–the round, enclosed bell that contains a captured “jinglet”–but there were also open bells with a fixed clapper, and chimes of all shapes and varieties. These bells had more purpose than merely the romantic effect and beautiful sound: Snow-covered streets with sleighs whispering behind a horse made very little noise, so the bells signaled oncoming traffic and were mandated by law in many cities. Pictured on the left is a hame bell which were bracketed to the hames attached to the horse collar. In the middle are pole/shaft bells which attached to the sleigh shafts for single horses or to the pole for two horse setups–they could either mounted to the top or suspended below the shaft or pole. On the right is a saddle chime which was attached to the back saddle on the harness. Bells were usually brass and plated nickel, gold or silver, based on the customer preference. Our museum has an incredible collection of sleigh bells… come on in and take a look!

Curator: The Modern Renaissance Man

NWCM curator, Jerry Bowman, standing in front of an 1888 Stagecoach, wearing an impressive cowboy hat.In the midst of a recent research rabbit hole, an entertaining post came to light: this delightfully snarky letter by one of the trustees of the Iziko South African Museum in Cape Town, South Africa, written in 1870, casting aspersions on a particular candidate’s aptitude for curatorial work. Here is Sir Richard Southey’s brief description of the ideal museum curator:

“The Curator must be a man of active habits, possess a practical knowledge of taxidermy (essential in our institution), must know a little of mechanics, and do a little carpentering very often. He must know how to handle the gun as well as the butterfly net, and be able to go out boating or riding, roughing it in fact, for specimens.”

The rest of the letter is basically about how the candidate under consideration is just a weedy, lazy entomologist, and therefore no good for the robust manly tasks required of a proper curator.

This humorous exploration of curatorship provided too good an opportunity to pass up to salute the skills and humor of our own beloved curator, Jerry Bowman, who does most of the writing for this blog, gives historical talks all over the country, is the museum’s #1 cheerleader, and maintains our world-class collection and building & grounds. Jerry has drive, passion, confidence, commitment, a sense of humor, and attention to detail that makes him the best man for job!

From a young age Jerry had a sense of humor which, if you know him, has only enhanced with age. His love of woodworking started early with exposure to carpentry projects through a beloved neighbor/grandfather-figure named Joe. Sports also played a big part of his life growing up, as a youth and well into college. Sports formed his discipline, confidence, and competitiveness to always get a job done right. After graduating from college, he enjoyed coaching and teaching math for a short time, but fate would have him enter the business world. During his 30+ year career with Bank of America he climbed the corporate ladder; his drive, honesty, and ability to work through the challenges of big business, including the sacrifices, and life experiences attributed to his success. Throughout his life, he maintained and cultivated his love of sports and woodworking, and added to the list of hobbies and projects through the years with things like restoring a ’53 Chevy and making wooden bird houses, trivets, and novelty items. His interest in history–especially the Civil War era–was a perfect fit for the museum, along with being a natural at fixing, tinkering, and building things! After retiring 20 years ago from SoCal and the “rat race of city life,” he is living his best life in the PNW! He is doing what he loves, conserving vehicles, giving entertaining tours, and speaking at engagements, all with a twinkle in his eye, as the curator at the NWCM! His passion is infectious, ask anyone he has talked with!

Nobody’s Gonna Snow On Our Parade: Sleigh Runners

1880s wooden and metal sleigh runners for converting a wheeled buggy into a sleigh.

1880s Sleigh Runners on display in the Northwest Carriage Museum

So, it’s 1895 and your family is living on $300 to $400 a year. You own a buggy and one horse; you can’t afford a second vehicle, especially a rarely used sleigh. Oh no, it’s snowing and you need to make a run to town for supplies! What to do… what to do!?  Get yourself some sleigh/sled runners! Take off them ol’ buggy wheels and strap on the runners–convert that ol’ buggy into a lean, mean snow machine! LOL! Seriously, though, our late 19th-century runners did just that: converted a wheeled horse drawn vehicle into a bob sleigh which could be used during snowy weather!

A complete set is on display at the museum.

Buggy Maintenance 101!

buggy wrenches

Did you know that a buggy wrench was the only tool needed to assemble your new buggy back in the 1890s? Often, buggies and other vehicles were ordered from catalogs; in fact, you could order a new buggy from the Sears catalog back in 1895 for $29.95. That buggy would be delivered to your home (not by Amazon) and all you needed to do was uncrate it, find your buggy wrench, and put it together. That little wrench fit your hub nuts and every other square nut on that buggy. Once assembled, just hook up your horse and go to town. Here’s another good idea: best take that wrench with you… you never know what might be loose after a ride to town! This original wrench is from our 1895 Studebaker buggy. I have actually used it on our buggy… pretty handy!